Upvc Door Lock Replacements
You might need to replace your upvc lock for a variety of reasons. Perhaps you've lost your key or the barrel has become damaged.
It is crucial to replace your Upvc locks by an expert. This will ensure the work is done to the highest standard and will provide the security level you need.
Lock Cylinder
The lock cylinder is the part of the lock that is opened with keys. The retaining screw separates it from the lock body that houses the locking mechanisms. A standard cylinder comes with a pin tumbler mechanism that is driven on one side by the key, and on the other side by the locking cam, which actuates the bolt mechanism of the lock. The cylinder is replaceable with a different one to change the lock's key operation, design or security level.
The most common type of cylinder used on uPVC doors is the Euro profile cylinder, but there are also British standard and anti-snap models available. The more secure cylinders feature a more complex pin tumbler and other components that help resist burglary methods such as snap guns or lock bumping.
To replace the cylinder you need to remove the door handle first and then loosen the retaining screw that holds the cylinder from the inside of the door. Once this is done you can take out the old cylinder and insert the new one. The process may be more difficult on older uPVC locks that are older than 20 years however, the modern locks are made of stronger materials and are easily fitted with the correct tools.
Make sure you have the right sized the cylinder you need to fit your door. Otherwise, it may be difficult to install. The dimensions are measured from the central circular part of the keyhole to the center of the square spindle. This measurement is known as the PZ dimension.
You can determine if the cylinder you've got is of the correct size by putting it inside your door lock and turning the key. If you are having trouble turning the key, it's probably time to replace it.
Some people will choose to have their uPVC doors and cylinder locks changed following an incident that damaged the locks. Certain people might desire to increase the security of their home or business home. In some instances changing your locks could be a legal necessity.
Lock Handle
A locksmith can perform the simple task of changing the lock barrels on a front door made of upvc. It can be completed in a matter of minutes. There are many reasons to change the locks. Your tenants might have departed without returning the keys. You may have lost the key.
To gain access to the screwhole in the backplate, you'll have to remove the handle and cylinder from the front door. This is typically done with the screwdriver, and is fairly easy, although you must be careful not to break the cylinder cover or handle. After you have removed the handle and cylinder, you'll have to measure the lock mechanism made of plastic to be able to purchase a new cylinder. The two most important measurements are the PZ and the Backset.
It is best to match a new cylinder to the manufacturer of your upvc locking mechanism. The easiest method to do this is to look at the faceplate made of metal of the lock. If there is a name engraved on it, then that would be your brand. The shape of the gearbox is also a method to identify the brand.
There are many different types of Upvc locks such as euro cylinder and anti-snap cylinder locks. These can be very similar, however there are some differences that make them superior or worse in security. The euro cylinder lock with anti-snap is more difficult to open than regular euro cylinder locks.
If you know how use screwdrivers, you can purchase the Upvc components and complete the work yourself. However it is recommended that you delegate the task to professionals. They can give you the correct components and finish the task quickly and with a high quality. A professional will also be able to repair any damage caused during the process.
Fixing Plates
The latch can be a problem on upvc doors if it is not aligned with the strike plate. This can cause the door not to close or become stuck. Often the reason for this is because the strike plate is not properly positioned to the frame. To fix this, just move the strike plate upwards or downwards until it is properly aligned with the frame. Alternately, tightening hinges may help. However, it is crucial not to tighten them too much, because this could cause damage to the screws.
It's not as difficult as you think to find replacement handles for upvc doors. On the internet, you can find various handles. The handle you select should match the cylinder as well as keyhole that are present on your door made of upvc. You can check this by measuring the distance between the keyhole and the center of the cylinder and also the spindle for your handle. It is also important to ensure that the spring cassette is compatible.
Another method to replace your upvc doors is to install a brand new lock mechanism. There are many options including locks that are designed for domestic use to locks that are suitable for commercial use. Many of the locks have been designed to resist corrosion, and come with various features.
Whether you are looking for a upvc door replacement handle or an entirely new lock, Fab and Fix has what you need. They have a range of handles in various styles and colors. They're all made from top-quality materials. They are also tested for a variety security standards. They are also easy to set up. Additionally, they are cheap and offer excellent value for your money.
Gearbox
Most of the time the reason for often, a uPVC lock's failure is usually due to the gearbox, not the whole multipoint mechanism. This means that changing the gearbox can be a much easier job than replacing the handle or barrel and it's something any reasonably competent DIYer can complete without too much difficulty.
The key to success when replacing a uPVC gearbox is to make use of the correct tools and follow the correct procedure. If you own a screwdriver and a tape measure, this procedure is relatively simple and can be completed in less than an hour. It is essential to read the description of the product before you begin. This will reveal the type of gearbox that fits your door.
Always ensure that replace window locks upvc are using a British Kite marked lock for your uPVC door, as they will include the most recent security features which protect against a variety of methods including the recent phenomenon referred to as "lock snapping". This means that your new lock is tested and approved by the UK government as being high-security.
It is essential to prop the door open or fix it in a way that it does not close during the process. In the beginning, you'll need to loosen the long screw that holds the handle in the position. Make sure to keep this screw in a safe location as you will require it to reconnect the handle later.
After you have removed the screw, you can remove the handle and view the inside of the cylinder for the first time. Once the old cylinder has been removed, you'll be required to carefully insert the new cylinder, ensuring that it is flush with the lock barrel. When you are satisfied that everything is in place, you can screw the long screw back into place and then screw the handle in its original position.
Lack of lubrication can be a major cause of a uPVC handle not lifting up to lock, however the issue could also be due to an entire mechanism failure. If you suspect this, it's best to call in a locksmith.